Vertical shaft impact crusher|Stone crusher-TRUEMAX

Vertical shaft impact crusher|Stone crusher-TRUEMAX
Availability:
  • Vertical shaft impact crusher|Stone crusher-TRUEMAX
  • TRUEMAX

PRODUCT INTRODUCTION

The ve巾cal shaft impact crusher (sand making machine) series products are optimized and designed by our factory after absorbing the domestic and foreign technologies. They have the characteristics of stable and reliable work, convenient maintenance, and high sand making rate. The product has a cubic shape and a low content of needles. It is especially suitable for stone shaping and production mechanism sand. It is a device for producing high-quality finished materials in industries such as hydropower, highways, construction, cement, and metal mining. The XRVSI series vertical shaft impact crusher is a combination of manufacturing and design, and assists the PLC control system to achieve simple operation of the man-machine interface, reducing the difficulty of operation and training time for operators.


WORKING PRINCIPLE

The material falls vertically from the upper part of the machine into the impeller rotating at high speed. Under the action of high­speed centrifugal force, it will collide with another part of the material that is diverted around the impeller in the form of an umbrella The material will be crushed by high-speed impact. Eddy currents are formed between the casings, which are crushed and rubbed against each other for many times, and are discharged vertically from the lower part.


Large processing capacity and high output-50-500t/h, compared with the traditional equipment under the same power, the output is increased by 30% and stable. 


Low consumption of wearing parts-the best crushing chamber material impact angle design, less friction with wear parts, 30% lower operating cost than traditional equipment, directly reducing the cost of equipment.


he product has excellent grain shape-the product is cube-shaped, with good grain shape, reasonable gradation, and adjustable fineness modulus; it is especially suitable for artificial sand making and stone shaping. Practice has proved that the sand making and shaping effect is 30% higher than other traditional equipment.


Hydraulic device, easy to maintain—Hydraulic cover-opening device makes the repair and replacement of parts in the crushing cavity convenient and quick, shortens the downtime, saves time and effort.


Thin oil lubrication and automatic maintenance—Germany's original thin oil lubrication station, dual oil pumps complement each other to ensure oil supply, and automatically shut down when there is no oil flow or oil pressure; oil cooling and heating devices ensure that the bearing lubrication is always in the best state. Thereby thoroughly solving the problems such as bearing heating, keeping the spindle bearing at a constant temperature, extending the maintenance cycle and service life.


Easy to install and easy to operate The equipment is light in weight, diverse in installation methods, and movable In installation; easy to install, repair and maintain, and easy to operate and use; once the specific purpose is specified, the VSI crusher only needs to be fine-tuned to maximize To maximize its excellent performance. 


Product configuration

Model

XRVSI7611

XRVSI8518

XRVSI9526

XRVSI1140

产量(t/h)

Output (t/h)

瀑落与中心进料

Waterfall and center feed

120~180

200~260

300~380

450~520

全中心进料

Full center feed

60~90

100~130

150~190

220~260

最大入料尺寸(mm)

Max.feeding size (mm)

软料Soft material

<35

<40

<45

<50

硬料Hard material

<30

<35

<40

<45

转速(r/min)Rotating speed (r/min)

1700~1890

1520~1690

1360~1510

1180~1310

双电机功率(kW)Double motor power (kw)

110

180

264

400

外形尺寸 长×宽×高(mm)

Dimensions L×W×H (mm)

3700×2150×2100

4140×2280×2425

4560×2447×2778

5000×2700×3300

重量 (t)

Weight (t)

11.8

14.5

17.8

25.6

型号 Model

XRVSI7611

XRVSI8518

XRVSI9526

XRVSI1140

稀油润滑站

Thin oil lubrication station

双油泵电机功率(kW)

Double oil pump motor power (kW)

2×0.25

安全保护

safety protection

双油泵互补保证供油;无油流、无油压自动停机; 冷降温;冬季电机加热启动。

Double oil pumps complement each other to ensure oil supply; no oil flow, no oil pressure, automatic shutdown; cold cooling; winter motor heating start

外形尺寸 长×宽×高(mm)

Dimensions L×W×H (mm)

820×520×1270

油箱加热功率(kW)

Fuel tank heating power (kW)

2



Vertical shaft impact

Continue to learn more about this product, you can submit your requirements here
Hangzhou Truemax Machinery & Equipment Co., Ltd, established in 2003, is an integrated supplier of machinery engineering, manufacturing, trading, parts and after-sales services for international projects.

Quick Links

Home

CONTACT US

Tel : 0086-571-85803511
Fax : 0086-571-85803522
Email : qrhr002@truemax.cn

Headquarters address:

11th Floor, Yinfeng Building, 1505 Binsheng Road, Hangzhou, China

Factory address:

No.118 Haifeng Road, Jianshan New District, Haining City, Zhejiang Province,China

Leave us a message
Hangzhou Truemax Machinery & Equipment Co., Ltd